Dana 60
Trail-Creeper Dana 60 Ring & Pinion Gears
Trail-Gear has a new addition to our Trail-Creeper" family of gears, the Trail-Creeper" Dana 60 Ring and Pinion Gears are the strongest on the market. Competition tested, trail approved, these gears get you where you need to go and back again. We are offering them in the most popular ratios for rock crawling and rock racing applications.
|
TRG140292 | D60-5.13 | $ 196.88 EACH | |
|
TRG140293 | D60-5.38 | $ 196.88 EACH | |
|
|
TRG140294 | D60-4.56 THICK/REVERSE CUT | $ 196.88 EACH | |
|
|
TRG140295 | D60-4.88 THICK/REVERSE CUT | $ 196.88 EACH | |
|
|
TRG140296 | D60-5.13 THICK/REVERSE CUT | $ 196.88 EACH | |
|
|
TRG140297 | D60-5.38 THICK/REVERSE CUT | $ 196.88 EACH | |
Dana 60 Ring & Pinion Setup Kit
These Dana 60 set up kits are made with Timken bearings and races and will work with both standard and reverse cut gears, thick or thin carriers, and both front and rear housings.
|
|
TRG140298 | Dana 60 Ring & Pinion Setup Kit | $ 140.63 KIT | |
Unit Hub
These unit hubs are not just another after market 1-ton unit hub that has been machined down and modified from an 8 lug to a 6 lug application. Trail-Gear has designed this unit for a specific application, so these 1-ton unit hubs will bolt right onto your Dana 60 or 9" housing that are set up for unit hubs. They are made to accommodate a 30 or a 35 spline axle shaft and use a 1/2-20 threaded wheel stud with a 6x5.5 wheel bolt pattern. These are the same unit hubs that you will see on most competition buggies. They are ultra strong and easy to replace. Simply unbolt the old one and bolt on the new replacement hub. This is a much simpler and stronger unit then the stock spindles that they replace.
|
|
TRG144012 | Unit Hub | $ 336.38 EACH | |
TG Dana 60 Drive Flange Kit
Tired of breaking your manual locking hubs on the trail? Well we have a great solution to that problem, our new TG Dana 60 Drive Flange Kit (35 spline). This kit will replace your existing 35 spline internal locking hubs or your Warn 35 spline manual locking hubs.The inner locking puck is made out of the highest quality 4340 chromoly to ensure that it never breaks or strips out and is also coated with black oxide to prevent rusting. The outer cover is CNC machined 6061 T6 billet aluminum and anodized black with the Trail-Gear logo. A rubber o-ring is included with the kit to keep your hub sealed and clean. Also included is a hardened snap ring to keep everything in place.
Kit Includes:
|
|
TRG144007K | TG Dana 60 Drive Flange Kit | $ 210.00 KIT | |
Trail-Gear Canada is an authorized dealer of Trail-Gear parts in Canada. We are here to provide Trail Gear parts to Canadians. If you would like to save yourself the hassle of ordering Trail-Gear parts from the USA you will find our prices very competitive and shipping rates affordable.