Rock Defense Toyota Front Bumper
HREW bumpers are strong, 1020 DOM bumpers are stronger, but Trail-Gear had to take things to the next level, now all of our bumpers are 1035 DOM material (1.75" X .120" wall).
1035 DOM tubing is more dent resistant than 1020 DOM, and it will not split down the seam as we have all seen the cheaper HREW tubing do. We can confidently say that our Rock Defense" bumpers are, by far, the strongest on the market.
Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches. For larger winches some minor trimming of the grill may be required. Bumper also features a 2 inch receiver that will make a great anchor point for winch or strap recoveries.
|
||||||||||||||||||||||||||||||||
|
Turn signal mounting tabs are not included. Unpainted steel finish. If using a winch with an integrated solenoid, such as the Warn 9500, trimming of the front plastic grill will be necessary. Will not work with roller type fairlead, requires hawse type fairlead. Not intended for use with a body lift. |
||||||||||||||||||||||||||||||||
|
TRG1200591K | Rock Defense Toyota Front Bumper - Model #1 | $ 392.63 each | Photo |
|
|
TRG1200601K | Rock Defense Toyota Front Bumper - Model #2 | $ 392.63 each | Photo |
|
|
TRG1200911K | Rock Defense Toyota Front Bumper - Model #4 | $ 392.63 each | Photo |
Rear Bumper
This rear bumper is one of the first in the industry that is constructed out of 100% DOM tubing. It fits 1st generation, 1984-1989 4Runners. The 1.75" OD X .120" wall thick DOM tubing will give you all the protection your 4Runner needs while playing on the rocks.The bumper is shipped unpainted and lightly oiled to prevent rusting during shipping.
Model 4 bumper for 90-95 4Runner will not work with factory swing a way tire carrier.
|
|
TRG1201081K | 84-88 Pick Up Rear Bumper | $ 309.38 each | |
| model #1 | ||||
|
|
TRG1201091KIT | 84-89 4Runner Rear Bumper | $ 309.38 EACH | |
| model #2 | ||||
|
|
TRG1201101KIT | 89-95 Pickup Rear Bumper | $ 309.38 each | |
| model #3 | ||||
|
|
TRG1201111KIT | 90-95 4Runner Rear Bumper | $ 309.38 each | |
| model #4 | ||||
Optional Rear Bumper to Frame Support Kit for 84-89 4Runner
This product is for the hardcore rock crawlers that need a little extra support for their rear bumper. This support welds to the bumper and can be welded or bolted to the frame for easy removal of the bumper.Note: Optional Rear Bumper to Frame Support Kit will not work with 84-88 Pickup bumper This product is shipped unpainted and lightly oiled to prevent rusting.
|
|
TRG1201121K | Rear Bumper to Frame Support Kit for 84-89 4Runner | $ 43.88 | |
Weld On Attachment Points
Trail-Gear's Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3" axle tube, and the other has a flat bottom that can be welded to plate, tubing, or any other flat surface. These make great attachment points for any rig or buggy, and work well with our 3/4" Shackle D-Ring. Sold individually.
|
|
TRG183003 | Weld-On Attachment Point - FLAT | $ 22.50 EACH | |
|
|
TRG183004 | Weld-On Attachment Point - COPED | $ 22.50 EACH | |
Aluminum Fairlead
Polished aluminum hawse fairlead. Designed for use with synthetic winch rope. Mounting holes are 10" on center for standard 3/8" bolts, compatible with most 5,000-9,500lb winches. Ultra smooth guide surface (rounded on both sides) to prevent damage to rope.
|
|
TRG183500 | Aluminum Fairlead | $ 39.38 Each | |
Front Bumper Winch Mount
Example of bumper created using winch mount
|
|
TRG1200211KIT | Front Bumper Winch Mount | $ 145.13 Each | |
Rock Defense Tube Doors
Tired of beating up your stock doors on the rocks or hanging your head out the window so you can see where you're going? Trail-Gear has the answer. We are proud to introduce our new Rock Defense Tube Doors for 2nd gen trucks and 4runners, the first of many applications to come. Our Rock Defense" Tube Doors are the strongest on the market and made from 1 3/4" x .120" wall 1035 DOM tubing to ensure that they will protect you and your truck from the rocks.
Rock Defense Tube Doors are sold as a complete set and include our newly designed pull action slam latches, which allow you to simply get in or out without trying to insert a pin to make the door latch. You just slam it like you would the stock door and it shuts securely. In conjunction with our slam latches we also included an adjustable rubber door stop that allows you to adjust how tightly your door shuts so there is never any rattling and the door never pops open.
Doors are shipped raw and will need to be painted before installation, all necessary hardware is included.
Tube doors fit:|
|
TRG1201321K | Rock Defense Tube Doors | $ 280.12 PAIR | |
TG Hi-Lift Jack Mount
Trail Gear's Hi-Lift Jack Mount is laser cut from 3/16" thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole drilled into it so that a hair-pin/cotter style pin can be inserted. This will keep the nut from rattling off and ensure that you never lose your hi-lift jack on the trail. We also added rubber pads that go between the jack and the mounts and a Velcro strap to hold the handle in place so that no vibration will be heard from any of the mounting locations. A second hole was placed on the mount so that you can put a padlock on the hi-lift to keep it totally secure from loss or theft.Product is shipped unpainted, must be welded on.
|
|
TRG180078K | TG Hi-Lift Jack Mount | $ 32.63 KIT | |
Trail-Gear Canada is an authorized dealer of Trail-Gear parts in Canada. We are here to provide Trail Gear parts to Canadians. If you would like to save yourself the hassle of ordering Trail-Gear parts from the USA you will find our prices very competitive and shipping rates affordable.
